DECORATIVE FILMS
Which decor do you like more: wood or stone?
Choose the fill color that best suits the design of your home and emphasizes its individuality.
All decors are available in the desired panel thickness and any combination (with external / internal decor).
The films we used are in bold. Along with the analogue
| NAME of decor | Renolit | Hornschuch-Continental | RAL molding |
| Anthracite sand | Anthracite grey 7016-05 083 | F436-7003 | 7016 |
| Structural anthracite | Anthracite grey 7016-05 116 | F436-5003 | 7016 |
| Golden oak | Golden Oak 2178-001 16 | F436-2036 | 8003 |
| Nut | Nussbaum V 2178-007 167 | F436-2048 | 8011 |
| Montana oak/dark | Dark oak 2052-089 167 | F436-2007 | 8014 |
| Black Ulti-Matt | Black Ulti-Matt 504700 | F436-6064 | 9005 |
| Umbra Matt | Umbra grey F470-6065 | 7022 | |
| Black-brown structural | Black brown 851805-116700 | F436-5010 | 8022 |
| Grey Matt | F436-6066 | 7040 | |
| White structural | Crystal White Ash P 9294-117900 | SKAI F456-50579016 | 9016 |
| Woodec Oak Turner | Turner Oak malt F470-3001 | 1001 | |
| Woodec Sheffield Oak Grey | Sheffield Oak concrete F470-3003 | 7045 | |
| Woodec Turner Oak toffee | Turner Oak toffee F470-3004 | 8028 | |
| Woodec Sheffield Alpine Oak | Sheffield Oak alpine F470-3002 | 7044 | |
| Woodec Turner Oak Amber | Turner Oak amber F470-9035 | 1011 | |
| Woodec Walnut Turner | Turner Oak walnut F470-9036 | 8003 | |
| Mattex Kitami dark | Kitami dark F470-9026 | 7021 | |
| Mattex Concrete | Salazar slate EF1541234 | 7039 | |
| Mattex DB703 | DB703 F470-1014 | 7039 | |
| Mattex Anthracite gray | anthracite gray F470-6003 | 7022 | |
| Mattex Deep Black | Jet black F476-6062 | 9011 | |
| White HPL | without film | 9016 |
- Color:
- White (1.5 mm PVC).
- White (2.0 mm HPL) - mandatory in the case of overlay panels, more resistant to scratches and thermal deformations!
- Aluminum sheets (standard 2.0 mm, optional 3.0 mm). Painted in the desired RAL color and texture. Optional 3.0 mm and 1.5 mm
Everyone knows that the surface must be prepared before any painting.
Some people are satisfied with just degreasing without removing metal oxides from the surface, and believe that this is quite enough, others go further and not only degrease, but also create conversion protective layers on the surface. In any case, if the surface is prepared incorrectly, then after a short time defects appear on the painted layer. To avoid the appearance of defects, it is necessary to carry out appropriate surface preparation before painting.
Tasks for high-quality surface preparation:
- it is necessary to remove the layer of dirt and oil residues on the metal surface
- remove oxide layer
- increase the contact area with the paint
- create an intermediate (conversion) layer between the metal and the paint - such a layer should improve the interaction of the polymer molecules of the paint with the metal and protect the metal surface from corrosion
https://www.youtube.com/watch?v=eGnatffrSys
For chemical treatment of aluminum surfaces, we chose the products and technology of the industry leader, Alufinidh GmbH (Germany).